Commodore Amiga 2500 68030 2000 Desktop Computer SCSI2SD RGBtoHDMI - CA1069336

Specs:
Commodore Amiga Motherboard rev.6.2 with ECS Chipset

v3.1 Kickstart ROM, 1MB ECS Agnus Chip RAM, 8373 ECS Super Denise

GVP 68030@33mhz CPU/FPU Accelerator
Fully Expanded to 16mb of GVP 60ns RAM SIMMs
Lastest Eprom v4.15, SCSI2SDv5.2 with 16gb SD SCSI Harddrive with
custom 3D Printed bracket to allow for External Accessibility
NOT Hot-Plugable make sure computer is off before inserting/removing SD Card

DVD-305S 40X Internal Slot Load SCSI CDROM Drive
Painted to match original front faceplate

New working coin cell battery and holder installed.
Installed onto the inner case front to be away from the motherboard and
allow easy access for replacing the battery when needed.

880kb Internal Floppy Disk Drive (Chinon FB-354)
Heads cleaned, gear & rails lubricated, runs great and quiet

Genuine Commodore Amiga 2000 200watt Clean power supply

RGBtoHDMI Scandoubler/FlickerFixer pixel-perfect
HDMI output to any modern LCD/LED Monitor
with custom made bracket for rear external access.
Onboard 23pin RGB Video for 15khz Monitors works as well.
Both can be used at the same time or independent of each other.
The video display is mirrored between the two devices if used at the same time.

Commodore Amiga 2000 Keyboard

Commodore 2 Button Tank Mouse and Black Mouse Pad

17" 4:3 DELL E176FPf Color LCD Monitor

HDMI to VGA Cable, Power Cords and NEW 6' Stereo Audio cable

Manuals/Books Included:
copy of GVP Accelerator Manual
Original AmigaOS v3.0 Manuals - Workbench, AmigaDOS and ARexx
am including v3.0 Manuals, which are basically 90% the same as version 3.1 manuals.
Introduction to the Commodore Amiga 2000 Manual

Can read about the RGBtoHDMI here:
https://github.com/c0pperdragon/Amiga-Digital-Video
Can read about the Gotek FlashFloppy here:
https://github.com/keirf/flashfloppy

Software Disks Included:
copy of GVP Accelerator Install Disk
copy of Amiga OS v3.1 Install, Workbench, Extras, Fonts, Storage, Locale
copy of AsimCDFS v3.10 CDROM Software Install Disk

CD Included:
Aminet 6 - June 1995 CD in Jewel Case to get you started

Some info about the SCSI2SDv5.2 adaptor configuration:
I currently have it setup as 4 Harddrives. ID0 to ID3 (2 Partitions on ID0 and the others are 1 Partition each),
CDROM is ID4. ID0 is 1.68GB (OS3.1) and 750mb (BACKUPS) Partitions, ID1 is 4GB (Work_4gb1),
ID2 is 4GB (Work_4gb2) and ID3 is 4GB (Work_4gb3). Its currently set to bootup into Amiga OS 3.1.
The adaptor is also setup with termination turned off (so power is not required to the adaptor).
I've installed it into a 3D printed bracket that is installed into one of the back expansion slots.
QUIET, COOL and FAST!!!

Rear right upper corner slightly dented,
has a couple of places where previous owner engraved his name in the metal,
has some small nicks, scratches and some yellowing here and there, otherwise,

All is Tested in Excellent Clean Working Condition and
Guaranteed Against DOA! as pictured.