Tested in Excellent Condition

PP&S 68040@28mhz 16MB Accelerator for Amiga 2000 2000HD 2500 Video Toaster 220620

  • Sale
  • $799.98
  • Regular price $899.98
Shipping calculated at checkout.

Progressive Peripherals & Software 68040@28mhz Accelerator and
Supra SCSI Controller with 16gb SCSI2SD Harddrive and 40x SLOT-LOAD SCSI CDROM Drive

68040@28mhz w/16mb RAM Accelerator
Copyright 1991 Progressive Peripherals & Software

The Progressive 2000/040 is a 68040 based accelerator card that plugs into the coprocessor slot of the Amiga 2000. The card contains the 68040 CPU with built in Floating Point Unit. The 68040 is clocked at approximately 28 MHz, nearly twenty-eight times the clock speed of the Amiga's 68000 CPU. The Progressive 2000/040 also contains fast, 32-bit wide memory to complement the 32-bit Motorola chips.

Comes with 68040@28mhz Amiga 2000 Accelerator populated with 16mb RAM (expandable to 32mb),
copy of Manual & Install Disk.


SupraDrive 2000
Copyright 1989 Supra Corporation


The SupraDrive 2000 is a full-length Zorro-II SCSI hard drive controller for the Amiga 2000 Computer.

The SupraDrive 2000 has the Latest version AMAB6 Boot ROMs.


Comes with Accelerator Card,
SupraDrive 2000 SCSI Controller,
A2000 3.1 Kickstart ROM,
copy of 3.1 Software Install Disks,
copy of Accelerator Manual and Install Disk,
2-Device Internal SCSI Ribbon Cable,
SCSI2SD 50pin SCSI Adaptor with 16gb SD Card Harddrive
(Formats to 14.5gb) with Amiga OS 3.1 pre-Installed and Bootable,
Highly desirable 40X Slot Load SCSI CDROM Drive,
Latest AsimCDFS CDROM Software,
and copy of FishMarket Disks 260 to 1000 CD to get you started. :-)


Ready to plug into the accelerator slot and Boot!

All is pre-configured and ready to use.

All Tested in Excellent Working Condition and Guaranteed Against DOA!

Shipping Includes Insurance and Signature Required upon delivery.

Some info about the SCSI2SDv5.2 adaptor configuration:
I currently have it setup as 4 Harddrives. ID0 to ID3 (2 Partitions on ID0 and the others are 1 Partition each), CDROM is ID4. ID0 is 2GB (OS3.1) and 435mb (BACKUPS) Partitions, ID1 is 4GB (Work_4gb1), ID2 is 4GB (Work_4gb2) and ID3 is 4GB (Work_4gb3). Its currently set to bootup into Amiga OS 3.1. The adpator is also setup with termination turned off (so power is not required to the adaptor). I've included a 3D printed tray that installs into the back expansion slot. The SCSI2SDv5.2 adaptor doesn't seem to benchmark very well, but the actual performance is amazing. SUPER Quick and FAST!!!