NTSC Commodore Amiga 2500/2000 Desktop Computer with
GVP 68030@33mhz CPU/FPU Accelerator, 8373 ECS Super Denise,
Fully Populated with 16mb Original GVP 60ns RAM SIMMS,
16gb SCSI2SD Harddrive, 40X Slot-Load SCSI CDROM Drive
RGBtoHDMI LCD/LED HDMI Scandoubler/FlickerFixer
17" 4:3 Color LCD Monitor
Specs:
Right front corner of faceplate is cracked, Shipping Includes Insurance and Signature Required. Please be sure to open the computer and make sure all cards are seated properly upon arrival.
Commodore Amiga Motherboard rev.6.2 with ECS Chipset
v3.1 Kickstart ROM, 1MB ECS Agnus Chip RAM, 8373 ECS Super Denise
GVP 68030@33mhz CPU/FPU Accelerator
Fully Expanded to 16mb of Original Matching GVP 60ns RAM SIMMs
Lastest Eprom v4.15, SCSI2SDv5.1 with 16gb SD SCSI Harddrive with
custom 3D Printed bracket to allow for External Accessibility
NOT Hot-Plugable make sure computer is off before inserting/removing SD Card
DVD-305S 40X Internal Slot Load SCSI CDROM Drive
Painted to match original front faceplate
New working coin cell battery and holder installed.
Installed onto the inner case front to be away from the motherboard and
allow easy access for replacing the battery when needed.
880kb Internal Floppy Disk Drive (Chinon FB-354)
Heads cleaned, gear & rails lubricated, runs great and quiet
Genuine Commodore Amiga 2000 200watt Clean power supply
RGBtoHDMI Scandoubler/FlickerFixer pixel-perfect
HDMI output to any modern LCD/LED Monitor
with custom made bracket for rear external access.
Onboard 23pin RGB Video for 15khz Monitors works as well.
Both can be used at the same time or independent of each other.
The video display is mirrored between the two devices if used at the same time.
Commodore Amiga 2000 Keyboard
Commodore 2 Button Tank Mouse and Black Mouse Pad
17" 4:3 DELL E176FPf Color LCD Monitor
Power Cord and NEW 6' Stereo Audio cable
Manuals/Books Included:
copy of GVP Accelerator Manual
Original AmigaOS v3.0 Manuals - Workbench, AmigaDOS and ARexx
am including v3.0 Manuals, which are basically 90% the same as version 3.1 manuals.
Introduction to the Commodore Amiga 2000 Manual
Can read about the RGBtoHDMI here:
https://github.com/c0pperdragon/Amiga-Digital-Video
Can read about the Gotek FlashFloppy here:
https://github.com/keirf/flashfloppy
Software Disks Included:
copy of GVP Accelerator Install Disk
copy of Amiga OS v3.1 Install, Workbench, Extras, Fonts, Storage, Locale
copy of AsimCDFS v3.10 CDROM Software Install Disk
CD Included:
copy of Fiskmarket v2.4 CD - Fish Disks 260-1000 to get you started
Some info about the SCSI2SDv5.1 adaptor configuration:
I currently have it setup as 4 Harddrives. ID0 to ID3 (2 Partitions on ID0 and the others are 1 Partition each),
CDROM is ID4. ID0 is 1.9GB (OS3.1) and 500mb (BACKUPS) Partitions, ID1 is 4GB (Work_4GB_1),
ID2 is 4GB (Work_4GB_2) and ID3 is 4GB (Work_4GB_3). Its currently set to bootup into Amiga OS 3.1.
The adaptor is also setup with termination turned off (so power is not required to the adaptor).
I've installed it into a 3D printed bracket that is installed into one of the back expansion slots.
QUIET, COOL and FAST!!!
Has a rather large deep scratch on the bottom of the case,
has some small nicks, scratches and some yellowing here and there, otherwise,
All is Tested in Excellent Clean Working Condition and
Guaranteed Against DOA! as pictured.
Will package well for safe shipping.
Sometimes they can get loose in the shipping process.